FFT VEP Series Thread Flat Face Couplings Sambungkeun Pegatkeun Dina Tekanan Teu Bocor Hidrolik Gancang Gancang pikeun Traktor Stucchi VEP-P/VEP-HD Series, Dixon VEP Series, DNP PST4/FSI Series, Voswinkel FT Series, Parker FET Series
FFT (VEP) Series - Threaded Datar-Raray gandeng - Sambungkeun / Pegatkeun sambungan dina tekenan
Ganda Pareum-Pareum Couplings Gancang
Interchanges jeung
Stucchi VEP-P / VEP-HD Series, Dixon VEP Series, DNP PST4 / FSI Series, Voswinkel FT Series, Parker FET Series
Fitur
■ Ukuran awak sadia 1/4" thru 1-1/2" (DN 6.3 thru 40).
■ tekanan kerja High 400-550 rentang bar dumasar kana ukuranana.
■ Nyambungkeun jeung disconnects ku leungeun nepi ka tekanan residual 300 bar.gaya low diperlukeun pikeun sambungan.
■ Desain raray datar ngaleungitkeun spillage nalika disconnection.Gaya ngonci benang ngahindarkeun brinelling & bocor prématur.
■ Résistansi dorongan anu luhur ngaleuwihan 1.000.000 siklus.
Aplikasi
Seri FFT ngagaduhan desain raray datar anu ngaleungitkeun tumpahan nalika sambungan sareng putus, sareng ngahindarkeun kokotor kana sirkuit.Anu langkung penting, séri FFT mangrupikeun gandeng jinis konci benang anu langkung aman sareng dipercaya tibatan sambungan desain bal-konci, khususna pikeun aplikasi hidrolik anu kritis sareng kuat.Runtuyan FFT bisa nyambung jeung megatkeun sambungan dina tekenan residual pikeun aplikasi sirkuit hidrolik kalawan impulses tekanan tinggi, kayaning rigs pangeboran, jasa oilfield, alat pangeboran, cranes, palu, paling beurat-tugas Equipment konstruksi, minyak & gas sarta aplikasi pertambangan.
| Bagian No. | ISO DN | Ukuran awak | Benang | A | E | D | G | C | F |
| FFT06-G04 | 6.3 | 1/4″ | G1/4″ | 71 | 54 | M30 x 2 | 38.8 | 22 | 27 |
| FFT10-G06 | 10 | 3/8" | G3/8″ | 83 | 66 | M33x2 | 41.8 | 27 | 30 |
| FFT10-G08 | 10 | 3/8" | G1/2″ | 85 | 71 | M33x2 | 41.8 | 27 | 30 |
| FFT12-G08 | 12.5 | 1/2″ | G1/2″ | 95 | 78 | M40x3 | 49.8 | 36 | 36 |
| FFT12-G12 | 12.5 | 1/2″ | G3/4″ | 98 | 85 | M40x3 | 49.8 | 36 | 36 |
| FFT16-G12 | 16 | 5/8″ | G3/4″ | 99 | 85 | M45x3 | 53.8 | 36 | 41 |
| FFT19-G12 | 19 | 3/4" | G3/4″ | 113 | 98 | M50x3 | 58.8 | 46 | 46 |
| FFT19-G16 | 19 | 3/4" | G1″ | 113 | 100 | M50x3 | 58.8 | 46 | 46 |
| FFT25-G16 | 25 | 1″ | G1″ | 124 | 106 | M58 x3 | 69.8 | 55 | 55 |
| FFT25-G20 | 25 | 1″ | G1-1/4″ | 124 | 106 | M58 x3 | 69.8 | 55 | 55 |
| FFT32-G20 | 31.5 | 1-1/4" | G1-1/4″ | 150 | 135 | M80x4 | 92.0 | 65 | 65 |
| FFT32-G24 | 31.5 | 1-1/4" | G1-1/2" | 150 | 135 | M80x4 | 92.0 | 65 | 65 |
| FFT40-G32 | 40 | 1-1/2" | G2″ | 218 | 225 | M130 x 6 | 200.0 | 90 | 90 |
Thread baku: BSPP (G), NPT, SAE O-Ring Boss (ORB) Thread bikang, thread séjén sadia pikeun urutan custom
Bahan baku: Steel, Stainless Steel
Diménsi luhur ngan pikeun BSPP (G) versi thread
Spésifikasi
| Ukuran Badan (ISO DN) | 6.3 | 10 | 12.5 | 16 | 19 | 25 | 31.5 | 40 |
| Aliran Maks (L/Min) | 24 | 46 | 90 | 148 | 200 | 378 | 750 | 1000 |
| Tekanan Operasi Max (MPa) | ||||||||
| Nyambung | 60 | 55 | 55 | 55 | 50 | 47 | 40 | 35 |
| Coupler Ngan | 42 | 33 | 33 | 33 | 33 | 30 | 27 | 27 |
| Nipple Ngan | 60 | 55 | 55 | 55 | 50 | 47 | 40 | 35 |
| Tekanan Burst (MPa) | ||||||||
| Nyambung | 150 | 140 | 140 | 140 | 125 | 120 | 110 | 110 |
| Coupler Ngan | 126 | 100 | 100 | 100 | 100 | 80 | 80 | 80 |
| Nipple Ngan | 150 | 140 | 140 | 140 | 125 | 120 | 110 | 110 |
| Tekanan Résidu Max Pikeun Sambungan (MPa) | ||||||||
| Duanana Jeung Tekanan | 25 | 25 | 20 | 20 | 15 | 15 | 5 | 2 |
| Coupler Jeung tekanan | 30 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Nipple Jeung Tekanan | 30 | 25 | 25 | 25 | 25 | 25 | 25 | 20 |
| Tekanan Résidu Max Pikeun Pegatkeun (MPa) | ||||||||
| 25 | 25 | 20 | 20 | 15 | 15 | 5 | 2 | |
| Suhu Rang | -20°C nepi ka +80°C | |||||||
| Segel Standar | NBR (Nitrile) | |||||||
FPM (Viton®) segel sadia tur konfigurasi baku pikeun QDs stainless steel
