F45 Jalu Pipa Cabang Tee SAE J512 #010425 SAE 45 ° Flare Fitting Adaptor Panyambung T1 145F 45
SAE #010425
| BAGIAN# | Flare OD × Thared | D | M | N |
| 45-03-02 | 3/16×1/8 | .126 | .75 | .75 |
| 45-04-02 | 1/4×1/8 | .189 | .78 | .78 |
| 45-04-04 | 1/4×1/4 | .189 | .88 | .88 |
| 45-05-02 | 5/16×1/8 | .219 | .88 | .80 |
| 45-05-04 | 5/16×1/4 | .219 | 1.00 | .94 |
| 45-06-04 | 3/8×1/4 | .282 | 1.00 | .94 |
| 45-06-06 | 3/8×3/8 | .282 | 1.00 | 1.00 |
| 45-06-08 | 3/8×1/2 | .282 | 1.12 | 1.12 |
| 45-08-06 | 1/2×3/8 | .408 | 1.16 | 1.09 |
| 45-08-08 | 1/2×1/2 | .408 | 1.22 | 1.22 |
| 45-10-08 | 5/8×1/2 | .500 | 1.41 | 1.31 |
| 45-12-08 | 3/4×1/2 | .625 | 1.63 | 1.59 |
| 45-12-12 | 3/4×3/4 | .625 | 1.63 | 1.44 |
Interchangeability pikeun rujukan
Parker: 145F-2-2 145F-4-2 145F-4-4 145F-5-4 145F-6-4 145F-6-6 145F-6-8 145F-8-6 145F-8-8 145F-10 -8
Eaton/WeatherHead : 45×4 45×4x4x4 45x6x6x6·45×8·45x8x8x8 45×12·
Midland: 10-203 10-204 10-204B*10-205 10-206 10-207 10-208 10-209 10-210 10-211 10-212 10-213 10-214 10-214 10-214 10-214 217 10-218 10-219 10-220 10-221
perhatian mangga: cutatan sarta pangiriman barang non-stock disadiakeun dina pamundut.Konfigurasi sareng diménsi tiasa robih tanpa aya bewara.Inpormasi tambahan tiasa dipendakan di SAE J530 Automotive Pipe Fittings sareng SAE J531 Drain Plugs.
OD sabenerna tina flare fittings
SAE 45° Flare Fittings & Adapter
Standar Industri - SAE J512 45 ° Flare
Spésifikasi
- Rentang Suhu: -65°F nepi ka +250°F (-53°C nepi ka +121°C) rentang dina tekanan operasi maksimum.
- Tekanan Gawé: nepi ka 2000 psi gumantung kana ukuran tube.Bakal tahan tekanan burst of tubing baku - nepi ka 5000 psi kalawan bundy-las (ganda flared) jeung 3500 psi kalawan tubing tambaga, gumantung kana ukuran.Jelas, Suhu sareng jinis pipa anu dianggo mangrupikeun faktor anu penting.
Parentah instalasi
- Potong pipah kana panjang anu dipikahoyong.Pastikeun sadaya burrs dipiceun jeung tungtung dipotong pasagi.
- Geser nut dina tabung.Threaded jeung "A" tina kacang kudu nyanghareupan kaluar.
- Flare tungtung tabung kalayan alat flaring 45 °.a-Ukur diaméter flare b-Nalungtik flare pikeun kaluar ipis kaleuleuwihan.
- Lubricat threads sarta ngumpul kana awak pas.Nut kudu dibalikkeun leungeun kaluar.
- Kencangkeun rakitan nganggo rengkuh dugi ka karasa padet.Ti titik éta, nerapkeun péngkolan hiji-kagenep.
SAE 45 Gelar Flare Fittings - Bahan Kuningan
Aplikasi
LP jeung gas alam, cair kaduruk, instrumentation, refrigeration, power steering, sistem hidrolik jeung pneumatic.Dipaké dina garis tekanan low, sedeng jeung luhur dina kaayaan paling ngarugikeun, cocog sareng tambaga, kuningan, aluminium sarta baja tubing hidrolik nu bisa flared.
Fitur
- Konstruksi - Dua sapotong awak sareng kacang, barstock lempeng & kelengkapan palsu.
- Résistansi Geter anu hadé - paké kacang panjang nalika résistansi geter langkung ageung diperyogikeun.
- Conformance - Fitting flare tugas beurat anu dijieun pikeun spésifikasi SAE, minuhan spésifikasi jeung standar ASA, ASME, SAE, sarta MS (standar Militér).
- Reusability - Bisa dirakit jeung ulang dirakit sababaraha kali & Nolak mékanis pull-kaluar.
Tambaga, kuningan, aluminium sarta pipah hidrolik baja nu bisa flared.
Toleransi
+/- .03 dina sakabéh dimensi.Data dimensi tiasa robih tanpa aya bewara.Punten nelepon kami nalika dimensi kritis
