1366 Female Panyambung SAE # 120103BA 66AB 1366 Kuningan Fittings DOT Air Brake Adaptor Panyambung Port Tungtung Pikeun Tambaga Tubing
SAE 120103BA 66AB 1366
| BAGIAN# | TUBE OD × jalu NPTF | C | D | M |
| 1366-04-02 | 1/4×1/8 | 9/16 | .219 | .84 |
| 1366-04-04 | 1/4×1/4 | 11/16 | .312 | 1.07 |
| 1366-06-02 | 3/8×1/8 | 9/16 | .219 | 1.00 |
| 1366-06-04 | 3/8×1/4 | 11/16 | .312 | 1.18 |
| 1366-06-06 | 3/8×3/8 | 7/8 | .438 | 1.18 |
| 1366-08-06 | 1/2×3/8 | 7/8 | .438 | 1.27 |
| 1366-08-08 | 1/2×1/2 | 1-1/16 | .562 | 1.44 |
| 1366-10-06 | 5/8×3/8 | 7/8 | .438 | 1.31 |
| 1366-10-08 | 5/8×1/2 | 1-1/16 | .562 | 1.50 |
Interchangeability pikeun rujukan
Parker: 66AB-4-2 6AB-4-4 6AB-6-2 66AB-6-4 6AB-6-6 66AB-8-6 66AB-8-8 66AB-10-6 66AB-10-8
Eaton/WeatherHead : 1366×6 1366x6x6 1366×8
Midland: 38-204 38-205 38-206 38-207 38-208 38-209 38-210 38-211 38-212
perhatian mangga: cutatan sarta pangiriman barang non-stock disadiakeun dina pamundut.Konfigurasi sareng diménsi tiasa robih tanpa aya bewara.Inpormasi tambahan tiasa dipendakan di SAE J530 Automotive Pipe Fittings sareng SAE J531 Drain Plugs.
DOT Air marake fittings Pikeun Tubing Tambaga
Conformance - minuhan spésifikasi sareng standar SAE J246 sareng DOT FMVSS 571.106.
Aplikasi
Anggo sareng pipa tambaga dina sistem rem hawa.
Fitur
- Konstruksi - Tilu unit sapotong: awak, kacang panjang sareng leungeun baju buleud.Extruded (CA360) jeung Ngajalin (CA377) Konfigurasi.
- Résistansi geter - Résistansi adil.
- Kaunggulan - Gampang ngumpul (teu aya persiapan tabung atanapi flaring diperyogikeun.) Awak séri 13XX (kalayan dukungan tabung) tiasa silih tukeur sareng séri 14xx (DOT Air marake fittings PikeunTubing Nylon) awak pikeun dipaké kalawan tubing nilon (SAE J844 Tipe A jeung B).
Spésifikasi
- Rentang Suhu: Fittings bakal tahan variasi ti -65 ° F ka + 250 ° F (-53 ° C nepi ka + 121 ° C)
- Tekanan kerja: tekanan operasi maksimum 150 psi.
Parentah Majelis
- Potong tabung kana panjang anu dipikahoyong squarely sareng cabut burrs.
- Geser nut jeung leungeun baju kana tubing.
- Selapkeun tubing kana pas dugi bottomed on taktak pas.Nut kudu ngaco handap nepi ka leungeun ketang, lajeng rengkuh-tightened sakumaha dituduhkeun di handap
| Ukuran pipa (OD) | 1/4″ | 3/8" | 1/2″ | 5/8″ | 3/4" |
| Ukuran Thread | 7/16-24 | 17/32-24 | 11/16-20 | 13/16-18 | 1-18 |
| Giliran tambahan TiLeungeun Ketang | 1-3/4 ~ 2 | 1-3/4 ~ 2 | 1-3/4 ~ 2 | 3 ~ 3-1/4 | 3 ~ 3-1/4 |
