1370 Awéwé SAE # 120203 Adaptor Siku Air Brake Tubing Tambaga 270AB 1370
SAE 120203 270AB 1370
| BAGIAN# | TUBE OD × bikang NPTF | M | N | D |
| 1370-04-02 | 1/4×1/8 | .69 | .52 | .189 |
| 1370-04-04 | 1/4×1/4 | .78 | .71 | .189 |
| 1370-06-02 | 3/8×1/8 | .83 | .59 | .314 |
| 1370-06-04 | 3/8×1/4 | .89 | .77 | .314 |
| 1370-06-06 | 3/8×3/8 | .93 | .77 | .314 |
| 1370-08-06 | 1/2×3/8 | 1.03 | .82 | .408 |
| 1370-08-08 | 1/2×1/2 | 1.13 | 1.01 | .408 |
Interchangeability pikeun rujukan
Parker: 270AB-4-2 270AB-4-4 270 AB-6-2 270 AB-6-4 270AB-6-6 270AB-8-6 270AB-8-8 270AB-10-8
Eaton/WeatherHead: 1370-4-2 1370-4-4 1370-6-2 1370-6-4 1370-6-6 1370-8-6 1370-8-8
Midland: 38-252 38-253 38-255 38-256 38-257 38-259
perhatian mangga: cutatan sarta pangiriman barang non-stock disadiakeun dina pamundut.Konfigurasi sareng diménsi tiasa robih tanpa aya bewara.Inpormasi tambahan tiasa dipendakan di SAE J530 Automotive Pipe Fittings sareng SAE J531 Drain Plugs.
DOT Air marake fittings Pikeun Tubing Tambaga
Conformance - minuhan spésifikasi sareng standar SAE J246 sareng DOT FMVSS 571.106.
Aplikasi
Anggo sareng pipa tambaga dina sistem rem hawa.
Fitur
- Konstruksi - Tilu unit sapotong: awak, kacang panjang sareng leungeun baju buleud.Extruded (CA360) jeung Ngajalin (CA377) Konfigurasi.
- Résistansi geter - Résistansi adil.
- Kaunggulan - Gampang ngumpul (teu aya persiapan tabung atanapi flaring diperyogikeun.) Awak séri 13XX (kalayan dukungan tabung) tiasa silih tukeur sareng séri 14xx (DOT Air marake fittings PikeunTubing Nylon) awak pikeun dipaké kalawan tubing nilon (SAE J844 Tipe A jeung B).
Spésifikasi
- Rentang Suhu: Fittings bakal tahan variasi ti -65 ° F ka + 250 ° F (-53 ° C nepi ka + 121 ° C)
- Tekanan kerja: tekanan operasi maksimum 150 psi.
Parentah Majelis
- Potong tabung kana panjang anu dipikahoyong squarely sareng cabut burrs.
- Geser nut jeung leungeun baju kana tubing.
- Selapkeun tubing kana pas dugi bottomed on taktak pas.Nut kudu ngaco handap nepi ka leungeun ketang, lajeng rengkuh-tightened sakumaha dituduhkeun di handap
| Ukuran pipa (OD) | 1/4″ | 3/8" | 1/2″ | 5/8″ | 3/4" |
| Ukuran Thread | 7/16-24 | 17/32-24 | 11/16-20 | 13/16-18 | 1-18 |
| Giliran tambahan TiLeungeun Ketang | 1-3/4 ~ 2 | 1-3/4 ~ 2 | 1-3/4 ~ 2 | 3 ~ 3-1/4 | 3 ~ 3-1/4 |
